FASTENERS

Product Details:

Jade Special Metals offers hex bolts available in a wide range of sizes, lengths, and materials to accommodate different application requirements. They are commonly made from steel, stainless steel, or other alloys, depending on the desired strength, corrosion resistance, and environmental conditions.Hex bolts are widely used in construction, machinery, automotive, and manufacturing industries.
Full thread hex bolts allow for greater flexibility in terms of length adjustment. They can be cut to size as needed without affecting the threaded portion, making them adaptable to various material thicknesses.

Product Details:

Jade Special Metals offers hex bolts available in a wide range of sizes, lengths, and materials to accommodate different application requirements. They are commonly made from steel, stainless steel, or other alloys, depending on the desired strength, corrosion resistance, and environmental conditions.Hex bolts are widely used in construction, machinery, automotive, and manufacturing industries.
Half thread hex bolts - The unthreaded section of the bolt shaft can provide stability and prevent the bolt from rotating once tightened, especially when used in combination with a nut or other fastening components.Load distribution: The threaded portion of the bolt distributes the load across the threaded section, while the unthreaded portion can help distribute the load over a wider area, reducing stress concentration.

Product Details:

The ASTM A193 specification covers a wide range of bolting materials, including alloy steel, stainless steel, and exotic alloys. Each material is specifically designed to meet different mechanical properties, such as tensile strength, yield strength, and hardness, to ensure the bolts can withstand the demands of specific applications.HEX BOLT & STUD BOLTS  and other types of bolts are designed to provide reliable and secure fastening in applications that require exceptional strength, resistance to extreme temperatures, and resistance to corrosion. These bolts are used in critical applications where failure could have severe consequences, making their quality and performance crucial.
A193 B7 bolts are made from a chromium-molybdenum alloy steel known as AISI 4140. This steel grade provides excellent tensile strength, hardness, and resistance to wear and fatigue.
It's important to note that A193 B7 bolts are typically used in conjunction with A194 Grade 2H heavy hex nuts, as they are designed to be used as a paired fastening system.Applications: A193 B7 bolts are commonly used in the oil and gas industry, chemical processing plants, power generation facilities, and other industrial applications where high strength and resistance to corrosion and high temperatures are required.

Product Details:

The ASTM A193 specification covers a wide range of bolting materials, including alloy steel, stainless steel, and exotic alloys. Each material is specifically designed to meet different mechanical properties, such as tensile strength, yield strength, and hardness, to ensure the bolts can withstand the demands of specific applications.HEX BOLT & STUD BOLTS  and other types of bolts are designed to provide reliable and secure fastening in applications that require exceptional strength, resistance to extreme temperatures, and resistance to corrosion. These bolts are used in critical applications where failure could have severe consequences, making their quality and performance crucial. A193 B7M bolts are known for their high tensile strength and yield strength, allowing them to withstand heavy loads and extreme conditions.A193 B7M bolts are made from a chromium-molybdenum alloy steel, typically AISI 4140 modified with a lower carbon content. This modification provides better ductility and impact resistance compared to A193 B7 bolts.

Product Details:

The ASTM A193 specification covers a wide range of bolting materials, including alloy steel, stainless steel, and exotic alloys. Each material is specifically designed to meet different mechanical properties, such as tensile strength, yield strength, and hardness, to ensure the bolts can withstand the demands of specific applications.HEX BOLT & STUD BOLTS  and other types of bolts are designed to provide reliable and secure fastening in applications that require exceptional strength, resistance to extreme temperatures, and resistance to corrosion. These bolts are used in critical applications where failure could have severe consequences, making their quality and performance crucial.
A193 B8 bolts are a specific type of fastener made from stainless steel, specifically AISI 304 or AISI 304L stainless steel. These bolts are commonly used in applications that require both strength and corrosion resistance.Stainless Steel Composition: A193 B8 bolts are made from AISI 304 or AISI 304L stainless steel, which is a versatile and widely used stainless steel grade known for its excellent corrosion resistance.A193 B8 bolts still offer good tensile strength and durability, making them suitable for a wide range of applications.

Product Details:

A193 B8M bolts are a specific type of fastener made from stainless steel, specifically AISI 316 or AISI 316L stainless steel. These bolts are widely used in applications that require both strength and superior corrosion resistance.Excellent Corrosion Resistance: A193 B8M bolts offer exceptional resistance to corrosion, making them suitable for applications in harsh and corrosive environments such as marine, chemical processing, and offshore industries. They can withstand exposure to chemicals, saltwater, and other corrosive substances.A193 B8M bolts are commonly used in industries where corrosion resistance is critical, such as marine equipment, chemical processing plants, oil and gas refineries, and pharmaceutical manufacturing

Product Details:

A193 B16 bolts are commonly used in industries such as oil and gas, power generation, and petrochemical, where high-temperature and high-pressure environments are present. They are suitable for critical applications such as flange connections, pressure vessels, and piping systems. A193 B16 bolts offer exceptional strength, heat resistance, and reliability in high-temperature and high-pressure applications. Their specialized alloy composition and heat treatment make them suitable for critical applications where strength and durability are paramount.They are suitable for critical applications such as flange connections, pressure vessels, and piping systems.
A193 B16 bolts are made from a chromium-molybdenum-vanadium alloy steel, typically AISI 4140 modified with the addition of vanadium. This modification enhances the bolt's high-temperature strength and resistance to thermal fatigue.A193 B16 bolts undergo a specialized heat treatment process called quenching and tempering.

Product Details:

We at Jade Special Metals offer GARDE 8M NUT,ASTM A194 Grade 8M nuts are typically used in conjunction with ASTM A193 Grade B8M bolts. Grade 8M nuts are available in a range of sizes and thread configurations. The most common thread standards include UNC (Unified Coarse) and UNF (Unified Fine). The size and thread pitch should be selected to match the corresponding ASTM A193 Grade B8M bolts or other compatible fasteners,8M nuts have high tensile strength and are capable of withstanding significant loads. The exact mechanical properties, such as yield strength, tensile strength, and hardness, are specified by the ASTM A194 standard and vary based on the specific material and heat treatment.

Product Details:

We at Jade Special Metals offer Grade 8 Nuts ,ASTM A194 Grade 8 nuts are typically used in combination with ASTM A193 Grade B7 bolts. This combination ensures a strong and reliable threaded connection in applications where high strength and resistance to pressure and temperature are required,material composition depends on the manufacturer and may include materials such as carbon steel, alloy steel, or stainless steel. The nuts undergo heat treatment to achieve the desired mechanical properties.Grade 8 nuts have high tensile strength and are capable of withstanding significant loads and pressures. The exact mechanical properties, such as yield strength, tensile strength, and hardness, are specified by the ASTM A194 standard and vary based on the material composition

Product Details:

2H Hex Nut refers to a specific type of hexagonal nut that is made from a high-strength material and has a specific grade rating.2H hex nut is a high-strength hexagonal nut made from a specific grade of material, often alloy steel. It is commonly used in applications that require greater strength and durability than lower-grade nuts can provide.

Product Details:

ASTM A194 Grade 7 hex nuts are a type of fastener used in various industries, including oil and gas, petrochemical, and power generation. These nuts are specifically designed to be used in conjunction with ASTM A193 Grade B7 bolts, creating a strong and reliable fastening system.The mechanical properties of ASTM A194 Grade 7 hex nuts meet the requirements specified by ASTM A194 standards. The typical mechanical properties include a minimum yield strength of 105,000 psi, a minimum tensile strength of 125,000 psi, and a minimum elongation of 16%.These hex nuts are commonly used in applications that require high strength and reliable fastening, such as flanges, pressure vessels, piping systems, and other critical connection

Product Details:

ASTM A453 Grade 660A are high-temperature, high-strength alloy steel fasteners commonly used in applications that require exceptional mechanical properties and resistance to elevated temperatures.ASTM A453 660A bolts are made from a precipitation-hardening stainless steel known as ASTM A286. This material contains high levels of chromium, nickel, and molybdenum, along with other alloying elements. The alloy composition provides excellent mechanical strength, high-temperature resistance, and corrosion resistance. ASTM A453 660A bolts comply with the specifications outlined in ASTM A453 standards, ensuring their quality, performance, and suitability for high-temperature applications. It is important to adhere to the specified standards and follow proper installation procedures for optimal performance and safety.

Product Details:

We at Jade Special Metals offer Stainless steel hex bolts and stud bolts are available in different material grades.
Stainless Steel 304 (A2) grade of stainless steel is widely used and offers good corrosion resistance in most environments. It is suitable for general-purpose applications.
Stainless Steel 316 (A4) grade provides higher corrosion resistance, especially in marine and chloride-rich environments. It is commonly used in applications where exposure to harsh conditions or saltwater is expected.
STAINLESS STEEL (SS) Fasteners Available in SS 316L, SS 410/410S , SS 310. SS 321 etc.
Stainless steel hex bolts and stud bolts come in a range of sizes, with standard thread sizes such as UNC (Unified Coarse), UNF (Unified Fine), and metric threads (e.g., M6, M8, M10, etc.). The size and thread pitch are specified according to the application requirements.

Product Details:

We at Jade Special Metals offer INCONEL FASTERNS, Inconel fasteners are available in various sizes, thread configurations, and forms (bolts, screws, nuts, washers) to suit different application requirements. They can be manufactured to meet industry standards such as ASTM, ASME, DIN, and ISO, ensuring compliance with specific dimensional and performance specifications.Inconel alloys are a group of nickel-based alloys that can include elements such as chromium, iron, molybdenum, cobalt, and others. The most commonly used Inconel alloys for fasteners include Inconel 600, Inconel 625, Inconel 718, and Inconel 825.
AVAILABLE GRADES:
INCONEL 600 // 2.4816 WERKSTOFF NR. // N06600 UNS 
INCONEL 601 // 2.4851 WERKSTOFF NR. // N06601 UNS 
INCONEL 625 // 2.4856 WERKSTOFF NR. // N06625 UNS 
INCONEL 825 // 2.4858 WERKSTOFF NR. // N08825 UNS 

AND MANY MORE GRADE AS PER CUSTOMER REQIURMENT 

Product Details:

We at Jade Special Metals offer HASTELLOY FASTENERS, Hastelloy fasteners are fastening components, such as bolts, screws, nuts, and washers, made from these specific Hastelloy alloys. Hastelloy alloys are available in several grades, each with its own unique composition and properties. Some commonly used Hastelloy alloys for fasteners include Hastelloy C-276, Hastelloy C-22, Hastelloy B-2, Hastelloy X, and Hastelloy G-30. Each alloy has specific characteristics that make it suitable for different applications and environments.Hastelloy alloys offer excellent resistance to high temperatures and can withstand elevated temperatures without significant loss of mechanical properties. This makes Hastelloy fasteners suitable for applications that involve exposure to high temperatures, such as gas turbines, heat exchangers, and furnace components,thread configurations, and forms to meet specific application requirements. They can be manufactured to conform to industry standards such as ASTM, ASME, DIN, and ISO, ensuring dimensional accuracy and performance compliance.

Grades Available:
Hastelloy C22 // WERKSTOFF NR. 2.4602 // UNS N06022
Hastelloy C276 // WERKSTOFF NR. 2.4819 // UNS N10276

ALSO OTHER GRADES AVAILBLE AS PER CUSTOMER REQUIREMENT

Product Details:

We at Jade Special Metals offer TITANIUM FASTENERS,Titanium fasteners are made from commercially pure titanium (Grade 2) or titanium alloys, such as Grade 5 (Ti-6Al-4V) or Grade 23 (Ti-6Al-4V ELI). These alloys provide enhanced strength and mechanical properties compared to pure titanium.Titanium has excellent corrosion resistance, particularly in environments involving seawater, chloride solutions, and acidic or alkaline conditions. This makes titanium fasteners suitable for marine, offshore, and chemical processing applications.Titanium is non-magnetic, making titanium fasteners suitable for applications where magnetism can cause interference, such as in electronic devices and MRI machines.


TITANIUM GR 2 // WERKSTOFF NR. 3.7035 // UNS R50400

TITANIUM GR 5 // WERKSTOFF NR. 3.7165 // UNS R56400

Product Details:

We at Jade Special Metals offer MONEL FASTENERS Monel fasteners are a type of fasteners made from Monel alloy. Monel is a nickel-copper alloy that offers excellent corrosion resistance and high strength, making it suitable for various demanding applications.Monel fasteners are known for their resistance to corrosion from a wide range of substances, including seawater, acids, alkalis, and other harsh chemicals. They are commonly used in marine environments, offshore oil and gas industries, chemical processing plants, and aerospace applications.
Monel alloys have high tensile strength and good mechanical properties, enabling them to withstand high loads and stress.

MONEL 400 // WERKSTOFF NR. 2.4360 // UNS N04400
MONEL K500 // WERKSTOFF NR. 2.4375 // UNS N05500

Product Details:

We at Jade Special Metals offer Super duplex fasteners It's a specialized type of fasteners made from super duplex stainless steel. Super duplex stainless steel is a highly alloyed stainless steel that offers even higher levels of corrosion resistance and strength compared to duplex stainless steel.Similar to duplex fasteners, super duplex fasteners include a range of types such as bolts, nuts, screws, washers, and studs. These fasteners are available in various sizes, threads, and configurations to meet specific project requirements.Due to their advanced properties, super duplex fasteners are more expensive than both duplex and standard stainless steel fasteners. However, their superior corrosion resistance and strength offer long-term cost savings by reducing maintenance and replacement needs in harsh environments.

SUPER DUPLEX S32750 // WERKSTOFF NR. 1.4410 // UNS S32750
SUPER DUPLEX S32760 // WERKSTOFF NR. 1.4410 // UNS S32760

Product Details:

We at Jade Special Metals offers A320 L43 HEX BOLT AND STUD BOLTS. A320 L43 is a specification established by ASTM International (formerly known as the American Society for Testing and Materials) for low-alloy steel fasteners. The "L43" designation indicates the specific alloy composition and mechanical properties of the material.

The term "A320 L43" refers to a specific material grade used for hex bolts and stud bolts in the fastener industry. This material grade is commonly associated with high-strength bolting components used in various industrial applications, including structural and mechanical systems
Mechanical Properties: A320 L43 fasteners are known for their high tensile strength and other mechanical properties. The material is heat-treated to achieve specific hardness and strength levels, making it suitable for use in high-pressure and high-temperature environments.


When using A320 L43 hex bolts and stud bolts, it's essential to follow the manufacturer's specifications, industry standards, and project requirements to ensure proper material selection, installation, and performance in the intended application. Proper tightening procedures and torque values should also be observed to maintain the integrity of bolted connections.

Product Details:

We at Jade Special Metals offer DUPLEX FASTENERS, Duplex fasteners refer to a specific type of fasteners that are made from duplex stainless steel. Duplex stainless steel is a type of stainless steel that combines the desirable properties of both austenitic and ferritic stainless steels. It offers excellent corrosion resistance, high strength, and good weldability., their superior corrosion resistance and strength make them a cost-effective choice in environments where regular stainless steel fasteners may fail or require frequent maintenance.

DUPLEX S31803 // WERKSTOFF NR. 1.4466  // UNS S31803
DUPLEX S32205 // WERKSTOFF NR. 1.4462  // UNS S32205
DUPLEX S32506// WERKSTOFF NR. 1.4462  // UNS S32506

Product Details:

Jade Special Metals offers ASTM A193 B8T fasteners.

The ASTM A193 specification covers a wide range of Fasteners materials, including alloy steel, stainless steel, and exotic alloys. Each material is specifically designed to meet different mechanical properties, such as tensile strength, yield strength, and hardness, to ensure the bolts can withstand the demands of specific applications. Fasteners in ASTM A193 B8T are designed to provide reliable and secure fastening in applications that require exceptional strength, resistance to extreme temperatures, and resistance to corrosion. These fasteners are used in critical applications where failure could have severe consequences, making their quality and performance crucial.

FASTENERS AVAILABLE WITH US:-
A193 B8T HEX BOLTS 
A193 B8T STUD BOLTS 
A193 B8T HEX NUT 

Product Details:

A Grade F436 plain washer is a specific type of flat washer that is manufactured to meet certain mechanical and chemical requirements outlined in the ASTM F436 standard. This standard is maintained by ASTM International (formerly known as the American Society for Testing and Materials) and specifies the characteristics and testing procedures for hardened steel washers used in various structural applications, especially in connection with high-strength bolts.

Grade F436 washers are hardened washers, and they are manufactured to specific hardness levels. There are two hardness levels specified within the ASTM F436 standard:

• Type 1: Washers are made from medium carbon alloy steel and are through-hardened to a hardness range of 38-45 HRC (Rockwell C hardness).

• Type 3: Washers are made from weathering steel and are through-hardened to a hardness range of 38-45 HRC (Rockwell C hardness).

Product Details:

ASTM A320 L7 is a specification that covers alloy steel bolting materials for low-temperature service. It is commonly used in applications where low temperatures, down to -150°F (-101°C), are encountered. ASTM A320 L7 bolts comply with the requirements specified by ASTM A320 standards. The typical mechanical properties include a minimum yield strength of 105,000 psi, a minimum tensile strength of 125,000 psi, and a minimum elongation of 16%. These properties ensure the bolts can withstand the stresses encountered in low-temperature environments. ASTM A320 L7 bolts can be coated with various materials to provide enhanced corrosion resistance. Common coating options include zinc plating, hot-dip galvanizing, and other protective coatings suitable for the specific application and environment.

Product Details:

ASTM A453 Grade 660 Class B specification provides a yield strength viz. 85 ksi [585 MPa] respectively for use in high temperature service for bolting components such as Stud bolts, screws, nuts, hex bolts & various other fasteners for pressure vessel and valve flanges.A453660 B bolts are commonly used in industries such as petrochemical, power generation, and oil and gas, where high-temperature and high-pressure conditions are encountered. They are suitable for use in equipment such as valves, flanges, and pressure vessels that operate at elevated temperatures. These bolts are known for their excellent resistance to creep and stress relaxation at elevated temperatures. ASTM A453 660B bolts may be coated with materials such as zinc or other protective coatings to enhance corrosion resistance, depending on the specific application and environment.

Product Details:

ASTM A307 specification covers various grades of carbon steel bolts,
Grade A: This grade of carbon steel bolts is intended for general applications, and it is suitable for use in environments where the bolts will not be subjected to extreme stress or high temperatures.
Grade B: Grade B bolts are made from a higher-strength carbon steel material and are suitable for applications requiring higher tensile strength.

Product Details:

ASTM A453 660C bolts are commonly used in industries such as petrochemical, power generation, and aerospace, where high-temperature and high-pressure conditions are encountered. They are suitable for use in equipment such as gas turbines, jet engines, and other components that operate at elevated temperatures. These bolts offer excellent resistance to creep, fatigue, and stress relaxation at high temperatures.ASTM A453 660 C bolts exhibit exceptional mechanical properties suitable for high-temperature applications. The specific mechanical properties may vary slightly depending on the specific heat treatment and manufacturing processes. However, typical mechanical properties include a minimum yield strength of 105,000 psi and a minimum tensile strength of 150,000 psi. These properties ensure reliable and secure fastening in demanding environments.

Product Details:

• MaterialStainless Steel
• Nut TypeBroaching
• Country of OriginMade in India
• deliveryas per need
• PaymentAll mode

Product Details:

1. ASTM A325 bolts are made from medium carbon steel and are typically manufactured using a heat-treating process to achieve the desired mechanical properties. The most common material used is medium carbon steel, such as ASTM A325 Type 1, which has a carbon content ranging from 0.30% to 0.55%. ASTM A325 bolts are available in two types: Type 1 and Type 3. Type 1 bolts are made from medium carbon steel and are quenched and tempered, while Type 3 bolts are weathering steel with enhanced atmospheric corrosion resistance.ASTM A325 bolts are typically installed using heavy-duty wrenches or power tools. Proper tightening procedures and torque specifications must be followed to ensure the correct tension and clamping force in the connection.

Product Details:

We at JADE SPECIAL METALS OFFERS  Fasteners in Grade 8.8 and 10.9 which are HIGH TENSILE BOLTS AND NUT. Grade 8.8 and Grade 10.9 bolts are indeed high tensile bolts commonly used in industrial and construction applications where strength and reliability are crucial. These grades represent the mechanical properties and strength of the bolts:

Grade 8.8 Bolts:

These bolts are made from medium carbon steel, typically with a carbon content of around 0.30% to 0.50%.The "8.8" refers to the minimum tensile strength in megapascals (MPa), which is approximately 800 MPa.

They are known for their good strength and moderate ductility, making them suitable for various industrial applications.

Grade 10.9 Bolts:

These bolts are made from alloy steel, typically with a carbon content of around 0.40% to 0.55%, and they may contain other alloying elements like chromium, molybdenum, or vanadium.The "10.9" refers to the minimum tensile strength in megapascals (MPa), which is approximately 1000 MPa.

Grade 10.9 bolts are even stronger than Grade 8.8 bolts and are used in applications where higher strength and durability are required.

These bolts are often used in heavy machinery, automotive, construction, and other industrial settings where the fasteners need to withstand high loads and stresses. It's important to choose the right grade of bolt for your specific application to ensure the safety and reliability of the equipment or structure.

Additionally, when working with high-tensile bolts, proper torque values and installation procedures should be followed to ensure that the bolts are tightened to the correct specifications for optimal performance and safety.

Product Details:

Jade Special Metals offers ALLEN BOLTS AND SOCKET HEAD CAP SCREW bolts available in a wide range of sizes, lengths, and materials to accommodate different application requirements. They are commonly made from steel, stainless steel, or other alloys, depending on the desired strength, corrosion resistance, and environmental conditions.Hex bolts are widely used in construction, machinery, automotive, and manufacturing industries.
Compact and low-profile design: The cylindrical shape and hex socket of Allen bolts make them ideal for applications where space is limited or where a flush, low-profile fastening is desired.Allen bolts are commonly used in applications where a strong and reliable connection is required. They are particularly useful for assembling machinery, appliances, bicycles, and electronic devices.

Product Details:

Product Details:

Allen countersunk (CSK) screw fasteners, also known as socket countersunk screws, are a specific type of screw commonly used for fastening applications where a flush surface is desired.

1. Design:

   • Head: Allen CSK screws have a flat, conical head with a recessed socket (hexagonal or Allen key drive) at the center. The countersunk shape allows the screw head to sit flush with the surface when fully tightened.
   • Threaded Shaft: The shaft of the screw is threaded to engage with a threaded hole or nut, providing a secure fastening.
   • Material: Allen CSK screws are typically made from mild steel, stainless steel, or other materials depending on the specific application requirements.

   • Applications:

     • Flush Mounting: Allen CSK screws are commonly used in applications where a flush surface is desired, such as attaching hardware to wood, metal, or plastic surfaces.
     • Furniture Assembly: They are frequently used in furniture assembly, cabinetry, woodworking, and interior finishing where aesthetics are important.
     • Machine Parts: Allen CSK screws are also used in machinery, equipment, and automotive applications where a flush or low-profile fastening solution is required.

Product Details:

We at JADE SPECIAL METALS OFFERS  Fasteners in Grade 8.8 and 10.9 which are HIGH TENSILE BOLTS AND NUT. Grade 8.8 and Grade 10.9 bolts are indeed high tensile bolts commonly used in industrial and construction applications where strength and reliability are crucial. These grades represent the mechanical properties and strength of the bolts:

Grade 8.8 Bolts:

These bolts are made from medium carbon steel, typically with a carbon content of around 0.30% to 0.50%.The "8.8" refers to the minimum tensile strength in megapascals (MPa), which is approximately 800 MPa.

They are known for their good strength and moderate ductility, making them suitable for various industrial applications.

Grade 10.9 Bolts:

These bolts are made from alloy steel, typically with a carbon content of around 0.40% to 0.55%, and they may contain other alloying elements like chromium, molybdenum, or vanadium.The "10.9" refers to the minimum tensile strength in megapascals (MPa), which is approximately 1000 MPa.

Grade 10.9 bolts are even stronger than Grade 8.8 bolts and are used in applications where higher strength and durability are required.

These bolts are often used in heavy machinery, automotive, construction, and other industrial settings where the fasteners need to withstand high loads and stresses. It's important to choose the right grade of bolt for your specific application to ensure the safety and reliability of the equipment or structure.

Additionally, when working with high-tensile bolts, proper torque values and installation procedures should be followed to ensure that the bolts are tightened to the correct specifications for optimal performance and safety.

Product Details:

Mild steel hex bolts and hex nuts are common types of fasteners used in various applications across industries. Here's an overview of each:

1. Hex Bolt:

   • Design: Hex bolts, also known as hex cap screws, have a hexagonal head with a threaded shaft. They are designed to be used with a wrench or socket for tightening.
   • Material: Mild steel hex bolts are made from low carbon steel, providing moderate strength and ease of machining.
   • Threaded: The shaft of a hex bolt is fully threaded or partially threaded, depending on the specific application requirements.
   • Applications: Hex bolts are versatile fasteners used in construction, machinery, automotive, and other industries where a strong, secure connection is needed.
   • Size Range: Available in a wide range of sizes, diameters, lengths, and thread pitches to accommodate different applications.